Missing Firmware File

The things that execute the GCode.

Missing Firmware File

Postby WBI3D » Wed Aug 05, 2015 10:53 pm

Today I was updating the printer with all the new digs, but I couldn't find the *.hex file for the printheads without a jumper. Where can I find those?

I have hothead_jmpr_2.300.hex (which works for the hotbed), but not the jumperless version. Thanks for the help!

Cheers!
WBI3D
 
Posts: 4
Joined: Wed Apr 22, 2015 5:34 pm

Re: Missing Firmware File

Postby Davo » Thu Aug 06, 2015 3:49 pm

There should be one in the same directory:

Image

And the next release will have a jumper version of 231 as well.
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: Missing Firmware File

Postby WBI3D » Thu Aug 06, 2015 4:09 pm

Awesome! Thanks for getting back to me. I do have hothead_231A.hex and will use that for current update.
WBI3D
 
Posts: 4
Joined: Wed Apr 22, 2015 5:34 pm

Re: Missing Firmware File

Postby WBI3D » Thu Aug 06, 2015 4:29 pm

Is the 231A.hex for the EMO as well as the MK1?
WBI3D
 
Posts: 4
Joined: Wed Apr 22, 2015 5:34 pm

Re: Missing Firmware File

Postby Davo » Thu Aug 06, 2015 6:19 pm

Yes, all 103 boards WITHOUT jumpers take 231A. This includes MK1-250, EMO-25, KRA-15, VOL-25, COD-25, VCD-25, ST1 and the SDK.

All 103 boards WITH jumpers should use jmpr_2300 for now. This includes MK1-250, EMO-25, KRA-15, VOL-25, COD-25, VCD-25, ST1 and the SDK.

Later today, Repetrel 2.511 should be available, and that will include 321A and 321J (jumper)... if not a new version.

Note that once your 407 is on 2.4xx, you don't need to get rear access anymore; it will say "connected" in the flashing tool without changing anything.
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: Missing Firmware File

Postby ISAS » Wed Mar 08, 2017 11:42 am

Hey Davo,
today I wanted to update the Firmware for our HotBed, problem is in our folder we can not find this 231A oder 232A nor the J versions only 2.300 with and without jumper or the new versions like 33A etc. We have the versions without jumpers and red RTD. Problem is that the 33A will not work for the HotBed (wrong temperature, no function) unlike I got it from the download manual...

So please would it be possible to collect a folder with every version of the firmware you listed in the manual?
ISAS
 
Posts: 3
Joined: Wed Nov 25, 2015 10:21 am

Re: Missing Firmware File

Postby Davo » Thu Mar 16, 2017 5:35 pm

That is my mistake, I apologize.

The file at http://hyrel3d.net/downloads/firmware/F ... 5_2017.rar NOW includes the older versions.

Davo
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm


Return to Repetrel & Firmware

Who is online

Users browsing this forum: No registered users and 1 guest

cron